Issue 5563: Support Text Change (02)                                                                                                                                                                                (smart-transducers-ftf)
Source: Institut fuer Technische Informatik (Mr. Thomas Losert, thomas@vmars.tuwien.ac.at)
Nature: Uncategorized Issue
Severity: 
Summary: In the former version the term "system file" denoted the configuration file

and the system file, but not the RODL file. Thus Section 2.4 "Smart Transducer 

Filesystem in the ST" should be restructured and some further explanations 

have to be added in order to make it easier understandable. 



The following paragraphs should be added:



"The namespace for files is subdivided into two parts:

* System Files (file nr. 0x00-0x0F and file nr. 0x38-0x3F)

* Application Specific Files (file nr. 0x10-0x37)"



and



"The System Files are dedicated to special tasks that are further described 

in the following sections (system files not covered in these sections are 

reserved for future extensions). All the remaining files are Application 

Specific Files and may be freely used in any desired manner as long as the 

first record (rec. nr. 0x00) contains the header record as specified above 

in order to be conformant to this specification."



This implicates that no further description is needed for the "Application

Specific Files" and the following chapters 2.4.x deal with "System Files"

only. These chapters should be reordered by ascending file-number of the 

respective files.






Resolution: Accept changes as proposed.
Revised Text: 9/29/02 Page 5
Inserted Paragraphs as proposed.
The former Section 2.4.7 “Application Specific Files” is obsolete now and thus
has been deleted.
Sections 2.4.x reordered with ascending File Numbers; the new order is:
2.4.1 The Round Descriptor Lists (RODLs) (file no. 0x00-0x07)
2.4.2 The Configuration File (file no. 0x08)
2.4.3 The Membership File (file no. 0x09)
2.4.4 The Round Sequence (ROSE) File
2.4.5 The Owner File (file no. 0x0B)
Smart Transducers FTF
Finalization Task Force Report
Disposition: Accepted
OMG Issue No: 5564
2.4.6 The Documentation File (file no. 0x3D)
Actions taken:
August 5, 2002: received issue
December 11, 2002: closed issue
Discussion: 

End of Annotations:=====
ISSUE #xx (author: Thomas Losert)

TYPE: Support Text Change



In the former version the term "system file" denoted the configuration
file

and the system file, but not the RODL file. Thus Section 2.4 "Smart
Transducer 

Filesystem in the ST" should be restructured and some further
explanations 

have to be added in order to make it easier understandable. 



The following paragraphs should be added:



"The namespace for files is subdivided into two parts:

* System Files (file nr. 0x00-0x0F and file nr. 0x38-0x3F)

* Application Specific Files (file nr. 0x10-0x37)"



and



"The System Files are dedicated to special tasks that are further
described 

in the following sections (system files not covered in these sections
are 

reserved for future extensions). All the remaining files are
Application 

Specific Files and may be freely used in any desired manner as long as
the 

first record (rec. nr. 0x00) contains the header record as specified
above 

in order to be conformant to this specification."



This implicates that no further description is needed for the
"Application

Specific Files" and the following chapters 2.4.x deal with "System
Files"

only. These chapters should be reordered by ascending file-number of
the 

respective files.