Issue 5609: no need for an MP round between MS rounds                                                                                                                                                               (smart-transducers-ftf)
Source: Institut fuer Technische Informatik (Mr. Thomas Losert, thomas@vmars.tuwien.ac.at)
Nature: Uncategorized Issue
Severity: 
Summary: It is mandatory that at the end of each round is an Inter-Round-Gap (IRG) of at
least one slot. This gap leaves a slave enough time to process an MSA round.
Thus there is no need for setting constraints to the order of the rounds. In Section
2.3.6 the following sentence should be removed then:
“Between any two MP rounds there must be an interval of sufficient
duration to execute one phase of an MS round, as depicted in Figure 2-5.”
Resolution: Accept changes as proposed.
Revised Text: done as proposed
Actions taken:
August 27, 2002: received issue
December 11, 2002: closed issue
Discussion: 

End of Annotations:=====
OMG Issue No:  XXXX
Title:	  no need for an MP round between MS rounds
(smart-transducers-ftf)
Source:
TTTech Computertechnik AG (Mr. Thomas Losert,
thomas@vmars.tuwien.ac.at)
Summary:
It is mandatory that at the end of each round is an Inter-Round-Gap
(IRG) of at least one slot. This gap leaves a slave enough time to
process an MSA round. Thus there is no need for setting constraints to
the order of the rounds. In Section 2.3.6 the following sentence
should be removed then:
"Between any two MP rounds there must be an interval of sufficient
duration to execute one phase of an MS round, as depicted in Figure
2-5."
Resolution:
See above.
Revised Text:
Done as proposed.
Disposition:	Accepted
Disposition Parameter:	None
OMG Issue No:  XXXX