Issue 9600: Section: 1.2.7.5 and 1.2.7.6 (CorbaToWsdl) (corbawsdl-rtf) Source: (, ) Nature: Revision Severity: Minor Summary: In Corba to WSDL/SOAP Interworking Spec: In section 1.2.7.5 and 1.2.7.6, the examples of soap encoded array types have the _SE_ prefix after the module identifier. The "_SE" prefix is supposed to be at the beginning of the mapped type name. Proposed Resolution: fix the examples to change "Example._SE_" to "_SE_Example." Revised Text: In 1.2.7.5 three occurances: <xsd:complexType name="Example._SE_longSeq"> <xsd:complexType name="Example._SE_strSeq"> <xsd.complexType name="Example._SE_structSeq"> In 1.2.7.6 one occurance: <xsd:complexType name="Example._SE_arrayLong" > Change: " "Example._SE_" To "_SE_Example." Resolution: Change the mapping definition text to agree with the examples. Revised Text: Change the first bullet in 1.2.7.5 From: " o SOAP Encoding - The SOAP specification provides an encoding for arrays. IDL sequences are mapped onto these SOAP arrays. For each IDL sequence a corresponding complex type is created as a restriction of SOAP-ENC:Array. The name of the type is prefixed with "_SE_". " To: " o SOAP Encoding - The SOAP specification provides an encoding for arrays. IDL sequences are mapped onto these SOAP arrays. For each IDL sequence a corresponding complex type is created as a restriction of SOAP-ENC:Array. The name of the IDL type is prefixed with "_SE_" , before applying any required IDL module prefixes. " Actions taken: April 27, 2006: received issue October 30, 2006: closed issue Discussion: The module prefex should be treated the same as if it were an xml namespace prefix. The decoration with soap encoding labels should occur in the type name before the module prefixes are attached, exactly as shown in the examples.. End of Annotations:===== Date: Fri, 05 May 2006 18:55:38 -0400 From: Tom Rutt Subject: Re: [Fwd: proposed resolution to corbawsdl rtf issue 9600] To: tom@coastin.com Cc: "Patten, Conor" , Dave Stringer , corbawsdl-rtf@omg.org, keith.moore@hp.com Reply-to: tom@coastin.com X-Accept-Language: en-us, en User-Agent: Mozilla Thunderbird 1.0.7 (Windows/20050923) Tom Rutt wrote: This one could be controversial, please review carefully On further thinking, I would like to reject this proposed solution. I think that the modules should be recognizable from the prefix to the identifier for the mapped IDL type. Also, if we want to future map idl module to namespaces, the prefix "_SE_ would appear after the nsprefix:_SE_ I now suggest we take the example as being the correct rendering of the mapping, and ammend the text to clarify that the _SE_ goes after all the module prefixes, and directly before the mapped IDL type. Tom Rutt A mistake in the example of soap encoded array in a module. Tom Rutt ------------------------------------------------------------------------ Subject: proposed resolution to corbawsdl rtf issue 9600 From: Tom Rutt Date: Thu, 27 Apr 2006 14:27:03 -0500 To: corbawsdl-rtf@omg.org To: corbawsdl-rtf@omg.org Please provide comments on this proposed resolution to the list. a vote is forthcoming ---------- This is issue # 9600 From: Tom Rutt Section: 1.2.7.5 and 1.2.7.6 (CorbaToWsdl) In Corba to WSDL/SOAP Interworking Spec: In section 1.2.7.5 and 1.2.7.6, the examples of soap encoded array types have the _SE_ prefix after the module identifier. The "_SE" prefix is supposed to be at the beginning of the mapped type name. Proposed Resolution: fix the examples to change "Example._SE_" to "_SE_Example." Revised Text: In 1.2.7.5 three occurances: In 1.2.7.6 one occurance: Change: " "Example._SE_" To "_SE_Example." -- ---------------------------------------------------- Tom Rutt email: tom@coastin.com; trutt@us.fujitsu.com Tel: +1 732 801 5744 Fax: +1 732 774 5133 n Corba to WSDL/SOAP Interworking Spec: In section 1.2.7.5 and 1.2.7.6, the examples of soap encoded array types have the _SE_ prefix after the module identifier. The ._SE. prefix is supposed to be at the beginning of the mapped type name. Proposed Resolution: fix the examples to change .Example._SE_. to ._SE_Example.. Revised Text: In 1.2.7.5 three occurances: In 1.2.7.6 one occurance: Change: . .Example._SE_. To ._SE_Example.. Date: Thu, 27 Apr 2006 14:27:03 -0500 From: Tom Rutt Reply-To: tom@coastin.com User-Agent: Mozilla Thunderbird 1.0.7 (Windows/20050923) X-Accept-Language: en-us, en To: corbawsdl-rtf@omg.org Subject: proposed resolution to corbawsdl rtf issue 9600 Please provide comments on this proposed resolution to the list. a vote is forthcoming ---------- This is issue # 9600 From: Tom Rutt Section: 1.2.7.5 and 1.2.7.6 (CorbaToWsdl) In Corba to WSDL/SOAP Interworking Spec: In section 1.2.7.5 and 1.2.7.6, the examples of soap encoded array types have the _SE_ prefix after the module identifier. The "_SE" prefix is supposed to be at the beginning of the mapped type name. Proposed Resolution: fix the examples to change "Example._SE_" to "_SE_Example." Revised Text: In 1.2.7.5 three occurances: In 1.2.7.6 one occurance: Change: " "Example._SE_" To "_SE_Example." -- ---------------------------------------------------- Tom Rutt email: tom@coastin.com; trutt@us.fujitsu.com Tel: +1 732 801 5744 Fax: +1 732 774 5133 Date: Fri, 28 Apr 2006 11:13:33 -0500 From: Tom Rutt Reply-To: tom@coastin.com User-Agent: Mozilla Thunderbird 1.0.7 (Windows/20050923) X-Accept-Language: en-us, en To: "Patten, Conor" , Dave Stringer , corbawsdl-rtf@omg.org, keith.moore@hp.com Subject: [Fwd: proposed resolution to corbawsdl rtf issue 9600] This one could be controversial, please review carefully A mistake in the example of soap encoded array in a module. Tom Rutt -- ---------------------------------------------------- Tom Rutt email: tom@coastin.com; trutt@us.fujitsu.com Tel: +1 732 801 5744 Fax: +1 732 774 5133 X-Account-Key: account2 Return-Path: Received: from amethyst.omg.org (amethyst.omg.org [192.67.184.64]) by plus11.host4u.net (8.11.6/8.11.6) with ESMTP id k3RKavH30054 for ; Thu, 27 Apr 2006 15:37:03 -0500 Received: from hobbit.omg.org (hobbit.omg.org [192.67.184.3]) by amethyst.omg.org (8.12.11/8.12.11) with ESMTP id k3RKQBFu030943 for ; Thu, 27 Apr 2006 16:26:11 -0400 Received: from plus11.host4u.net [69.94.56.108] by hobbit.omg.org asmtp(4.3a1) id 16566; Thu, 27 Apr 2006 16:20:53 -0400 (EDT) Received: from [127.0.0.1] (ip-69-33-195-2.iad.megapath.net [69.33.195.2]) by plus11.host4u.net (8.11.6/8.11.6) with ESMTP id k3RKapH29030 for ; Thu, 27 Apr 2006 15:36:52 -0500 Message-ID: <44511B07.6090903@coastin.com> Date: Thu, 27 Apr 2006 14:27:03 -0500 From: Tom Rutt Reply-To: tom@coastin.com User-Agent: Mozilla Thunderbird 1.0.7 (Windows/20050923) X-Accept-Language: en-us, en MIME-Version: 1.0 To: corbawsdl-rtf@omg.org Subject: proposed resolution to corbawsdl rtf issue 9600 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Spam-Checker-Version: SpamAssassin 2.63 (2004-01-11) on plus11.host4u.net X-Spam-Status: No, hits=0.0 required=5.0 tests=none autolearn=no version=2.63 X-Spam-Level: Please provide comments on this proposed resolution to the list. a vote is forthcoming ---------- This is issue # 9600 From: Tom Rutt Section: 1.2.7.5 and 1.2.7.6 (CorbaToWsdl) In Corba to WSDL/SOAP Interworking Spec: In section 1.2.7.5 and 1.2.7.6, the examples of soap encoded array types have the _SE_ prefix after the module identifier. The "_SE" prefix is supposed to be at the beginning of the mapped type name. Proposed Resolution: fix the examples to change "Example._SE_" to "_SE_Example." Revised Text: In 1.2.7.5 three occurances: In 1.2.7.6 one occurance: Change: " "Example._SE_" To "_SE_Example." -- ---------------------------------------------------- Tom Rutt email: tom@coastin.com; trutt@us.fujitsu.com Tel: +1 732 801 5744 Fax: +1 732 774 5133