Manufacturing Technology &
Industrial Systems Task Force

CAD Services V1.0
Finalization Task Force

The CAD Services V1.1 RTF report was approved by the Board of Directors and has become Available Technology

Index

New!
Organization
Schedule
Issue Identification and Resolution
Resources

New!

3 June 2002

Final CAD Services V1.0 FTF Report – OMG Document mfg/02-04-07
The CAD Services V1.0 FTF Report was approved by the Architecture Board in the Yokohama meeting in April 2002. The report is now under adoption vote by the Domain Technology Committee (DTC). On approval by the DTC the report will proceed to approval by the Board of Directors based on the acceptability of the commercialization statements of the submitters.
The FTF's work was successfully completed & therefore allowed to expire on its scheduled date of 29 April 2002.
CAD Services V1.1 Revision Task Force was formed by the DTC on 26 April 2002 to handle any further issues.

Organization

The CAD Services V1.0 Technology was recommended by the ManTIS to the Domain Technology Committee which commenced it's recommendation ballot in its Plenary, 13 July 2001 (see Resources, below for the technology submission documents During that plenary the CAD Services V1.0 Finalization Task Force (FTF) was chartered by the DTC in anticipation of a successful adoption.

An FTF is a peer organization to the Manufacturing Technology and Industrial Systems Task Force. The ManTIS supports FTF's of particular interest to it through it's web pages and meeting scheduling.

Charter

The FTF's Mission is to produce a Formal Technology Specification and to resolve issues that could impede the implementability of the specification.

FTF Co-Chairs

Russell Claus
NASA Glenn Research Center Open Chair

Membership:

Member	Organization	eMail
Russ Claus (Chair)	NASA	[email protected]
Mikhail KazaKov	Open Cascade	[email protected]
David Flater	NIST	[email protected]
Ron Hare	GE Aircraft Engines	[email protected]
Larry Johnson	MSC.Software	[email protected]
Uwe Kaufmann	Fraunhofer IPK	[email protected]
Jim Martin	SDRC	[email protected]
Jim Stevens	UGS	[email protected]

Contact information

The CAD FTF Group may be contacted via e-mail at mailto:[email protected].

Issues can be submitted for consideration via: mailto:[email protected]

Schedule

Event Date

Draft Adopted Specification:
21 Days before publish 1 October 2001

Published Specification
28 Days before comment close 22 October 2001

Public Comments Closed 19 Novermber 2001

Draft Recommendation & Report
(3-wk rule for Anaheim) 7 January 2002

The report was mis-posted (wrong copy). In DTC the report deadline was moved to 1-April-2002, the 3-wk rule for Yokohama.

Report Approved by Architecture Board. Report approved
25 April 2002

Recommendation & Report
(Mon after Anaheim) 4 February 2002
Date moved in Anaheim to 29 April 2002.

The FTF's work was completed & therefore allowed to expire on its scheduled date of 29 April 2002.
A CAD Services V1.1 Revision Task Force was formed by the DTC on 26 April 2002 to handle any further issues.

Event	Date
Draft Adopted Specification: 21 Days before publish	1 October 2001
Published Specification 28 Days before comment close	22 October 2001
Public Comments Closed	19 Novermber 2001
Draft Recommendation & Report (3-wk rule for Anaheim)	7 January 2002 The report was mis-posted (wrong copy). In DTC the report deadline was moved to 1-April-2002, the 3-wk rule for Yokohama.
Report Approved by Architecture Board.	Report approved 25 April 2002
Recommendation & Report (Mon after Anaheim)	4 February 2002 Date moved in Anaheim to 29 April 2002.
The FTF's work was completed & therefore allowed to expire on its scheduled date of 29 April 2002. A CAD Services V1.1 Revision Task Force was formed by the DTC on 26 April 2002 to handle any further issues.

Issue Identification and Resolution

Evaluation Issue Log

In the Danvers Meeting, July 2001 and the Evaluation Team Identified Issues concerning the original submission..The following link is to the table of the issues identified and their resolutions: ManTIS Submission Evaluation Team Issue Log

Resources:

CAD Services V1.0 FTF Report – OMG Document mfg/02-04-07
CAD Services V1.0 RFP – OMG Document mfg/2000-06-07
CAD Services V1.0 Revised Submission – OMG Document mfg/2001-06-03
CAD Services V1.0 Errata – OMG Document mfg/2001-07-09
CAD Services V1.0 Convenience Document (Revised Submission and Errata) – OMG Document mfg/2001-07-10

Return to ManTIS home

This page was updated on 19 January 2004. Please send comments and suggestions to [email protected] by email.

Last updated on: 11/09/2007